3-layer Seam Tape with Stretch

Apply with a normal clothes iron at 130-150 degrees (two dots) with a teflon sheet or baking paper to protect the iron from glue. Power output on irons and material compatibilities may vary, so try with scrap pieces first. Note the heat resistance of the fabric before applying. E.g. neoprene withstands the needed temperatures easily but it might slightly shrink or compress when heated.

• Meant for waterproofing sewn seams. Not to attach fabric.
• Designed for 3-fabrics which have a lining tricot or similar on the inside surface. Thus not at its best on a bare coating/membrane surface.
• You can also cut the tape narrower to fit on tight seams.

Width: 22 mm
Roll size: 34 m

Does not stick to siliconized fabrics.