Meiltä parhaat ulkoilumateriaalit ja varusteet!
Productos‪» Outdoor Gear‪» Skiing & Winter Gear‪» Skin Accessories‪» Ski Skin Glues‪»

Colltex Ski Skin Hotmelt Adhesive 75ml

Colltex Ski Skin Hotmelt Adhesive 75ml


Precio
26,90 + gastos de envío
Incl. IVA 25.5 %


Cantidad
uds




The maximum amount you can order is the same as the number of articles in stock and on the way to us.
Disponibilidad
Aproximadamente 1 - 7 día(s) desde el pedido. La fiabilidad de la estimación es bueno.

Disponibilidad
Notifíquenme cuando este producto esté disponible


Descripción
Colltex adhesive tube for total renewal of adhesive coating. Includes instructions for use.

Important note: Apply the adhesive in several steps. Squeeze about 40 cm of adhesive out of the tube and evenly spread it with a spatula over the entire width of the skin immediately. Repeat this step until the entire adhering surface of the skin is covered with adhesive. Allow to dry for 6 to 10 hours before covering with the protective foil.

Note: different types and brands of climbing skin glue don't necessarily work or mix well together. Remember to test and if needed remove old glue before applying a different kind of glue.

Please note! This product is not suitable for Colltex CT40 skins. CT40 skins need their own adhesive.

Amount: 75 ml

Instructional video

Recoating_with_Colltex_hotmelt_adhesive_EN_06 from Colltex on Vimeo.

Use the “hotmelt adhesive” from the tube for partial or complete renewal of the hotmelt adhesive layer. Apply it at room temperature. Fix the ski skin to a table and clean it as well as possible. The best way to do so is with a soldering iron with spatula. Press the hotmelt adhesive directly from the tube onto the ski skin and distribute it regularly over the entire adhesive layer using a spatula. Tip: distribution is best achieved with a roller. Allow the adhesive to dry for at least 6-8 hours. Protect the new hotmelt adhesive layer with protective netting and stow the ski skin in the bag intended for this purpose.


Peso
0,351 kg(Incluye el peso del embalaje)


Porcentaje de devoluciones
0.00


Comentarios
Añadir comentario

Marca


Productos usualmente pedidos con este producto:

Colltex Warming Scraper 100W
 
Productos‪»Outdoor Gear‪»Skiing & Winter Gear‪»Skin Accessories‪»Ski Skin Glues‪»
Colltex Warming Scraper 100W
45,00 €
A warming scraper designed for cleaning self-adhesive ski skins and for preparing to apply a new coating of adhesive.
En stock
Colltex Quicktex Adhesive Pads for Ski Skins
 
Productos‪»Outdoor Gear‪»Skiing & Winter Gear‪»Skin Accessories‪»Ski Skin Glues‪»
Colltex Quicktex Adhesive Pads for Ski Skins
4,00 €
Colltex adhesive pads - no nonsense help when the ends of adhesive ski skins detach while you are skiing.
Temporalmente fuera de stock
Colltex Protective Net By The Meter
 
Productos‪»Outdoor Gear‪»Skiing & Winter Gear‪»Skin Accessories‪»Ski Skin Waxes and Cheat Sheets‪»
Colltex Protective Net By The Meter
7,50 €
Protect your adhesive ski skins from dirt and drying-out with multi-use Colltex protective netting.
Temporalmente fuera de stock
Mix Ski Skins 50 mm, Crystal Blue
 
Productos‪»Outdoor Gear‪»Skiing & Winter Gear‪»Ski Skins‪»
Mix Ski Skins 50 mm, Crystal Blue
109,90 €
Long ski skins for ski touring and nordic touring skis. Good suitability for long ski expeditions and for pulling a sled.
En stock
Mix 38 mm Ski Skin Material By the Meter, Crystal Blue
 
Productos‪»Outdoor Gear‪»Skiing & Winter Gear‪»Ski Skins‪»
Mix 38 mm Ski Skin Material By the Meter, Crystal Blue
25,90 €
Climbing skin material for 'build it yourself' climbing skins.
En stock
Mix Ski Skins 38 mm, Crystal Blue
 
Productos‪»Outdoor Gear‪»Skiing & Winter Gear‪»Ski Skins‪»
Mix Ski Skins 38 mm, Crystal Blue
99,90 €
Long ski skins for ski touring and nordic touring skis. Good suitability for long ski expeditions and for pulling a sled.
En stock